A roof is usually subjected to very harsh and adverse climatic conditions ranging from the hot sun to very cold extreme climate. It is therefore prone to a lot of deterioration hence necessitating repairs or replacement at some point based on the extent of damage inflicted on the roof.
A repair is done when the damage is not overly severe hence at this point the roof can be salvaged without the need of an expensive replacement altogether.
Repairs are a temporary remedy but they aid to serve the purpose prior to any contemplation of an entire roof replacement. This article clearly enumerates and discusses the various steps involved in the roof repair process from start to finish.
- Tools and Things Needed
At the outset, you need to understand the various tools and items that are needed to repair a roof. This includes a ladder, a hammer, roofing nails, a sealant, a crowbar, chalk, roofing materials, and a fall protection kit among others. It is always advised that you do some inspection on the roof to determine its current state to avoid commencing a project on the wrong foot without some solid assessment and eventually ending up with some unintended results. This helps you determine whether you can do this on your own or whether a roofing contractor is necessary. An inspection will aid you to figure out whether you need to do some repairs or merely replace some missing, broken, or cracked shingles. It also helps you figure out whether to proceed with the repairs if the roof shows signs of aging, where the roofing shingles are curling or depicts instances of lost granules. You can either do the inspection yourself or schedule an inspection with a roofing company.
To elaborate on the step-by-step roof repair process, an inspection is deemed to be a fundamental prerequisite. The decision on whether to do the repairs yourself or whether to hire an experienced roofing contractor is vital and only a roof inspection can help you decide accordingly. Further, an inspection is done severally including during the continuation of the project to determine whether replacements are necessary and once the repairs are finished to make a proper assessment of the roof and either approve or disapprove the status of the roof with appropriate suggestions and recommendations.
General Protection and Insuring
The roof repairing process is very complex and it entails a lot of handiwork. This can lead to some instances of destruction if ample care is not taken to protect your property either directly under the roof or adjacent to the roof repair project. In case you have opted to hire a roofing contractor, it is critical to ensure that the roofing contractor is well insured to avoid incurring unwarranted losses and an endless back and forth with your roofing contractor in case they are not insured and you need to claim some damages directly from them.
Dealing With Old Roofing Material
Some roofs might necessitate a sectional roof replacement where it is determined that a roof repair cannot suffice. The implication herein is that the old roofing material in some of these sections will need to be removed. The removal of the old shingles is also followed up by the removal of the underlayment. This renders it quite easy to check the roof decking and to establish whether it is in pristine condition or whether some work needs to be done on the same. These are of the areas that are often overlooked hence it is paramount that the roof decking is also checked after the removal of the old shingles and the underlayment to guarantee that the roof repairs are comprehensively done.
As illustrated in the foregoing, ample preparation ought to be done in readiness for the shingles. The roof decking ought to be checked and the required repairs are done to remove the possible rotten wood and to do the nailing work again until the roof decking is left without blemish.
- Installation, Tidying Up and Inspection
This is predicated on the approach you are employing and in case you have hired a roofing contractor, the strategy that he has used. After the decking repairs and satisfaction that there are not any lingering issues, the new roofing material is now ready for installation followed by cleaning up the site and an after project inspection to ensure that everything is done accordingly.
The aforementioned is the step-by-step roof repair process to help you comprehend how the same is done. However, you should not hesitate from liaising with a roofing expert or professional to obtain a second opinion for your clarity in case of any blurriness about how to undertake this project.